Description:
The ThermaDataTM logger is a cost effective, self-contained temperature data-logger or blind recording thermometer designed to record the temperature of the surrounding environment. The recording time and sample rate can be easily selected from the software and, unlike most low cost loggers, the ThermaData logger will continue recording during and after downloading the data. By selecting continuous logging it is possible to start the ThermaData logger only once and never have to reset its parameters again, even if downloaded regularly.
The user can set high and low alarm values for an application. A button push will allow a simple visual inspection of the unit to show if either of these limits has been exceeded. An illuminated red LED will warn the user that the alarm limits have been exceeded (reject) or an illuminated green LED will advise the user that the alarm limits have not been exceeded (accept).
The ThermaDataTM logger is housed in a water-resistant polyethylene case and is available in seven colours: blue, white, yellow, green, red, brown and black.
The logger software demonstrates the flexibility and availability of options for use of the product while not requiring the product to be present.
The ThermaDataTM Palm application has been designed to enable ThermaData? logger users to download data without removing the ThermaData logger from its monitoring position. The ThermaData? Palm interface plugs into any PalmOS? hand held computer's serial connection lead.
There are two methods of download, manual prompts the user for connection of the ThermaData? logger and once uploaded the data is shown on screen. Auto acquire mode checks automatically for a connected ThermaData? logger. Once the upload is complete a bleep signifies the finish of the process. Once uploaded from the ThermaData? logger the files can be viewed in different formats. The summary gives an overview of the data including start and end dates and times, number of samples taken, alarm settings and number of alarms that have occurred.
The graph feature shows the data as a line graph.
The zoom feature allows the user to zoom in and view down to 10 samples per screen, then by tapping on a point on the graph the sample number, time, date, temperature value and alarm status of sample are displayed. The data/alarms can be viewed as a list. User notes can be added and attached to the file. Palm Hotsync transfers the data to a PC where it may be interrogated using the ThermaDataTM logger application.
